![]() Conclusion: The electro/Fe2+ /persulfate process showed acceptable performance in removal of COD, TSS and dye. The removal efficiency of single application of electrooxidation was 58.2%, 52.2% and 68% for COD, TSS and dye, respectively. By making changes in the parameters, the efficiency of process also changed. Results: The results showed that under optimum conditions (pH: 3, Fe+2 dosage: 0.1 g/L and density: 5A) the removal efficiencies of process in COD, TSS and dye were 91.6, 73.5 and 93.1%, respectively. The COD, TSS and dye measurement was done according to the standard methods. We studied the effects of some operating parameters including pH (3 11), divalent iron ion dose (0.1 to 0.5 g/L), concentration of persulfate anion (0.5-2 g/L) and direct current electric rate (1-5 A) in removal of COD, TSS and dye from wastewater. reactor equipped with four iron electrodes. Materials and methods: In this study, the batch experiment was performed using a. The aim of this study was to investigate the efficiency removal of COD, TSS and dye from industrial effluent in Buali industrial area in Hamedan. Feasibility of long term and short term methods for the treatment of wastewater. ![]() ![]() ![]() P>Wastewater got much of our intention these days because wastewater is polluting our lakes, pounds and even sea have a lot of contaminated amount of waste. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |